The main advantage of the Compact® is its limited height, which renders this mat ideal for installation on the floor, preferably in a rubber frame. Because of its limited height, the Compact® usually has the same thickness as the tiles, carpet or parquet and is therefore easy to install without having to cut away the underlying layer.

              CHARACTERISTICS


INDOOR USE OPEN MOISTURE REMOVAL MUD COARSE DIRT
(with scrub insert)		 HIGH HEELS TROLLEYS EASY MAINTENANCE ROLLABLE

mid traffic

   
    
 
              COMPOSITION
 
  Rollable entrance mat available in different versions. The Compact® Dry (polyamide drying inserts), Compact® Scrub (polypropylene scrubbing inserts), Compact® Needle felt (polypropylene), Compact® Vinyl (flexible PVC inserts) and Compact® Mix (combination of different inserts).
 
              CONSTRUCTION
 
 
          
 
 
              COLOURS   D=dry  S=scrub  N=needle felt  V=vinyl
 
 
Textile >
  grey | D antracite | D blue-grey | D dark brown | D brown | D grey | S black | S coco | S
       
  black | V antracite | N grey | N blue | N brown | N      
 
 
              TECHNICAL DATA
 
 
  
  properties of the materials
 
 
 
  aluminium profile
 
 
 
 
Compact®  
Shape   
Mat height 8 mm
Aluminium profile 41 mm wide x 6 mm high
Point load 1746 kg
Bending load 65 N/m
 
 
 
  inserts
 
 
 
 
Textile height : 5 mm
Textile width : 30 mm
Textile base width : 29,5 mm
Material of drying inserts : 100 % multifilament polyamide
50.450.000 multifilaments per m²
Material of scrubbing inserts : polypropylene
45.400.000 multifilaments per m²
1.001.000 monofilaments per m²
Material of needle felt inserts : 100 % polypropylene
Weight : ±1200 g/m²
Sound insulation : DIN52210 23 dB
Material of vinyl inserts : flexible PVC
Shore density 80 or 90
 
 
 
  
  accessories
 
 
 
 
Socket head screws : stainless steel DIN916A2 M4x8
 
 
 
  
  approximate total weight
 
 
 
 
Compact® 8,5 kg/m²
 
 
              TESTS
 
 
    All tests have been carried out by the University of Ghent, textile department. A copy of the official test results is available upon request. Samples of materials subjected to the stringent wear test (Wronz test) are available for inspection at Verimpex, Brugge.
  in general Dry Scrub
Fire (in walking direction) pr EN ISO 11925-2
pr EN ISO 9239-1		 Class B Class B
Smoke Classification according to Pe EN 13501-1 (2000) S 1 S 1
Colourfastness ISO 105 B02 (1994) Class 6-7 * Class 6-7 *
Wronz Value 25.000    
Moisture absorption test Report 02-785 A
Extra weight compared to dry state wet after 1 hour after 24 hours
Compact® Dry 1154,07 gr/m² 851,11 gr/m² 374,44 gr/m²
Compact® Scrub 1157,03 gr/m² 837,33 gr/m² 424,88 gr/m²
* Class 8 is the best result. 		 
 
              EXECUTION
 
 
  
  installation
 
 
 
 
 
 
height installation well depth
8 mm in a matwell,
on the floor with a ramping profile
or in a rubber frame		 10 mm
 
 
 
  
  production
 
 
 
  The mat is made to size in the factory. In principle, it is made in one piece, but in case of larger surfaces, it is advisable to divide this mat into several sections. When making the mat, the dimensions of the sections are determined by the weight of each section. The layout and the arrangement of the different sections is determined in consultation with the manufacturer. In case of broad surfaces, the sections are placed next to one another and separated by a reversed T-shaped profile. The width of the mats is determined on the basis of aesthetic considerations and required functionality.
 
 
 
 
              MAINTENANCE
 
 
 
Regular maintenance
  • Remove the dirt from the mat by vacuuming in the direction of the profiles (not perpendicular to the direction of the profiles).
Periodic maintenance
  • Roll up the mat and remove the dirt accumulated under the mat with a vacuum cleaner or with a dustpan and brush.
  • Coarse, sticky or wet dirt remaining on the mat is removed using a hard scrubbing brush in combination with water and a universal detergent.
Thorough maintenance
  • The mat is removed from the matwell for thorough cleaning.
  • Vacuum the matwell and the mat thoroughly.
  • Clean the mat with a hard scrubbing brush, in combination with water and a universal detergent.
  • Let the mat dry during a few hours before placing it back in the matwell.
 
     
  Remove the dirt from under the mat by vacuuming in the direction of the profiles (not perpendicular to the direction of the profiles).     Clean the mat with a a garden hose or a hard scrubbing brush in combination with water and a universal detergent. Let dry completely. Do not use a high-pressure cleaner.
 
 
              WARRANTY
 
  2 years for structural defects in case of normale use is offered in accordance with the warranty conditions.  
 
              REFERENCES
 
 
  > Office building - Brugge
  > Shop Noordzandstraat - Brugge